Can We Do Without Inorganic P In Feed?

reading time
Article | 30.07.2024
Lode Nollet PhD

Phytate-phosphorus, the storage form of phosphorus (P) in cereal plants, is the target for phytase, releasing the plants' own P and reducing the need for sources of inorganic P to be added to the feed formulation. Replacing all inorganic P in the feed without reducing animal performance is possible for certain formulations, however some considerations need to be made.

 

Consider the P norms used at formulation

The level of inclusion of inorganic P in feed depends on the P requirements imposed. As of two years ago, the prices of inorganic P rose sharply, causing a tendency to formulate diets closer to the animals' actual requirements for P, reducing the safety margin typically included. This reduced the amount of inorganic P in the feed.

 

Increasing the dose of phytase

Increasing the dose of phytase reduces the inclusion of inorganic P sources. In theory, all inorganic P can be removed from the diet. However, the limiting factor is the amount of phytate-P in the diet.

While in normal commercial diets (corn or wheat combined with soy) the phytate-P level is approximately 2.5 g/kg, the presence of alternative protein sources can increase these levels up to 2.8 g/kg. On the contrary, including proteins of animal origin (which do not contain any phytate-P) will reduce the level of phytate-P in feed down to 2.0 g/kg.

Assuming that at best only 80% of the phytate is physically accessible by the phytase (and so degradable), this means the maximum amount of P which can be released varies between 1.6 and 2.2 g/kg. Formulating with higher P matrix values for a phytase when added at a higher inclusion level is in theory possible, but in reality, the concentration of phytate-P is the limiting factor.

 

Taking calcium into account

It is well known that limestone, the major source of calcium (Ca) in feed, has a negative impact on the action of a phytase, in particular when fed in excess and in a fine (highly soluble) form. Reducing the limestone inclusion level and shifting to a coarser form will improve the efficiency of the phytase and thereby its potency to reduce inorganic P sources.

 

Use a good phytase

The two major characteristics a phytase needs are:

  • thermostability
  • reliable matrix values

In the first case, a loss of phytase activity due to the high temperatures used during feed manufacture results in lower P release from the phytate than expected. In the second case, if the P matrix value is overestimated, there is a risk that the final feed has a P deficiency. Both characteristics are important, especially as formulation for P gets closer to the actual P requirements, so there is less room for error.

 

Recommendations

Table 1 gives an overview of the recommended doses of OptiPhos® Plus, a heat stable phytase with reliable matrix values, and at which inclusion levels the feed no longer contains inorganic P considering the target available P levels imposed.

 

Table 1. Recommended inclusion levels of OptiPhos® Plus in feeds not containing meat and bone meal. Inclusion rates marked with a * indicate the feed does not contain inorganic P

 

global presence

Local support from a global company

Huvepharma® has a distribution network which covers more than 90 countries in 6 continents. Find your nearest Huvepharma® representative today.
Find your local contact
about us

Huvepharma®

Huvepharma® is a fast-growing, global pharmaceutical company with a focus on developing, manufacturing and marketing human and animal health and nutrition products.
more about us

Change country

The Huvepharma® distribution network covers 90 countries in 6 continents. Please select a country from the list below to see the products and services available in that region.

To view all products and services, select Global from the dropdown menu or click .

Africa

Asia

Europe

North America

Oceania

South America

Change language

Huvepharma has a remarkable distribution network which covers 90 countries in 6 continents. To offer you the best services, we ask you to select your country.

Europe

United States

Click here to visit the local website or close this popup to stay on the global website.

top
Your browser is out of date!

Update your browser to view this website correctly. Update my browser now